BORRI Ingenio SFC

Static Frequency Converter 100-2000 kVA

Borri range of Static Frequency Converters are designed and built for the harshest conditions and to provide high reliable power supply converting 50 Hz supply to 60 Hz equipment and to different voltages.
Using state-of-the-art IGBT technology with DSP (Digital Signal Processors) controls we convert the input AC power through a IGBT PFC sine-wave rectifier to DC and then to an AC sine-wave IGBT inverter to produce a full sine-wave output at the new frequency and voltage.

Вложение	Размер
Ingenio SFC	124,49 КБ

Voltage	380 – 440 V ± 10% 3P+N (or any voltage with input transformer)
Nominal supply frequency	50 or 60 Hz
Frequency tolerance	± 5 Hz
Harmonics	< 3% THDi (at rated load)
Power Factor	Unity

Capacity rating	100 kVA to 2000 kVA pf 1
Voltage	380 – 480 V (or any voltage with output transformer)
Frequency	50 or 60 Hz (consult factory for other frequencies)
Voltage harmonics	< 2.5% THDv (linear load)
Overload capability	120% for 10 mins; 150% for 30 seconds
Short circuit current limit	200% for 2 seconds
Voltage accuracy	50 or 60 Hz (consult factory for other frequencies)
Frequency accuracy	+/- 0.1%

Efficiency	95% Typically

Enclosure IP rating	IP20 Cabinet (higher protection up to IP54 on request)
Operating temperature	0 - 40°C (up to 55°C with derating)
Cooling	Forced air
Capacity derating with elevation	-1.0 % / 100 m for application above 1000 m, 2000 m maximum
Humidity	< 95% non - condensing
Noise	< 65

Digital inputs (voltage free contacts)	Start; Stop/Reset
Digital outputs (relay outputs)	Running (NO); Warning (NO); Fault (NC)
Relay output ratings	230 Vac 1 A

Quality assurance, environment, health and safety	ISO 9001:2008, ISO 14001:2004, BS OHSAS 18001:2007
Safety	IEC/EN 62040-1
EMC	IEC/EN 62040-2
Environmental aspects	IEC/EN 62040-4;
Test and performance	IEC/EN 62040-3
Protection degree	IEC 60529
Marine classifications (on request)	DV, DNV, GL, ABS, CCS (++)
Marking	CE

Оставить заявку